FTR-K1A006W-KW

FUJITSUFTR-K1A006W-KWTES1004711-00-A-RPower Relay 24VDC 16A SPST-NO(29x12.7x15.7)mm THT25 X TRAY, ROHS Peak 80A inrush current (1 form A type): This indicates the maximum current that can flow through the relay during initial energization. High insulation: The relay has a high level of insulation. The insulation distance between the coil and contacts is a minimum of 10mm. It has a dielectric strength of 5KV and surge strength of 10KV, indicating its ability to withstand high voltage spikes or surges. Class F coil wire: The relay utilizes Class F coil wire, which refers to a type of insulation class for the coil wire's thermal endurance. Low coil power: The relay has a low coil power consumption of 400mW, indicating it requires relatively less power to operate. Cadmium f Glow wire compliant type: It is mentioned that there is a Cadmium f Glow wire compliant type available. This indicates that the relay satisfies the requirements for Glow Wire Testing (GWT) as required for relays in the IEC/EN 60335-1 standard. Safety standards: The relay is approved by safety standards such as UL, CSA, VDE, and CQC. This means it meets the necessary safety requirements for those respective standards. UL, CSA TV-5 rating approved (make contact): The relay has been approved with a TV-5 rating by UL and CSA for its make contact, indicating its ability to handle high current. Flux proof, RTII: The relay is flux proof, meaning it is designed to withstand the effects of flux or solder during the soldering process. RTII refers to a creepage and clearance category for electrical components. RoHS compliant: The relay is compliant with the Restriction of Hazardous Substances (RoHS) directive, which restricts the use of certain hazardous substances in electronic products. DOWNLOAD DATASHEET