MAX485ECSA
In stock: 150
$1.6000
/ ea
MAXIM INTEGRATED
MAX4827ELT
MAX4827ELTCurrent-Limit Switches with NO-LOAD
In stock: 167
On our shelves in San Jose. We do not dropship.
Stock on our shelves
Date code and country of origin on every lot.
| Quantity | Date code | Country of origin |
|---|---|---|
| 167 | — | United States |
| 167 | 1 lot on the shelf | |
Need a specific date code, or all of it from a single lot? Tell us on the quote and we will confirm before shipping.
Specifications
| Manufacturer | MAXIM INTEGRATED |
|---|---|
| Manufacturer part number | MAX4827ELT |
| Category | IC |
| Description | MAX4827ELTCurrent-Limit Switches with NO-LOAD |
Compliance & export
| Country of origin | United States |
|---|
Classification is provided for reference and confirmed on the invoice. Certificate of conformance and date-code guarantee on request — ask with your order.
Description
MAX4827ELT
Similar parts on our shelves
Same part number family — confirm the specs before you swap.
MAX487ECSA
In stock: 244
$3.2000
/ ea
MAX4899AEETE+
MAX4899AEETE+MULTIPLEXER DUAL 4X1 16TQFN
In stock: 400
$2.9500
/ ea
MAX485ESA+T
MAX485ESA+T MAXIM INTEGRATED INTEGRATED IC, LINE TRNSCVR The MAX481, MAX483, MAX485, MAX487-MAX491, and MAX1487 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120uA and 500uA of supply current when unloaded or fully loaded with disabled drivers. Additionally, the MAX481, MAX483, and MAX487 have a low-current shutdown mode in which they consume only 0.1uA. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. The MAX487 and MAX1487 feature quarter-unit-load receiver input impedance, allowing up to 128 MAX487/ MAX1487 transceivers on the bus. Full-duplex communications are obtained using the MAX488-MAX491, while the MAX481, MAX483, MAX485, MAX487, and MAX1487 are designed for half-duplex applications. DOWNLOAD DATASHEET
In stock: 1,950
$2.0000
/ ea