Parts from LINEAR

LTC3025EDC#TRMPBF

LTC2606IDD-1#PBF

LTC4367HDD#PBF

LTC16931IS8#PBF

LTC16931IS8#PBFLTC1693-1IS8#PBFLTC16931IS8100 X TUBE ROHS

LT1129CST-3.3TR

LT1129CST-3.3TR LT1129CST-3.3 TUBE

LT1086CM

LDO Voltage Regulators LT1086 - 1.5A Low Dropout Positive Regulators Adjustable and Fixed 2.85V, 3.3V, 3.6V, 5V, 12V

LT1512CS#8PBF

LT1512CS#8PBF BATT CHRGR CONST I/V 8-SOIC 100 X TUBES ROHS MALAYSIA

LT1129CST-3.3

LT1129CST-3.378 X TUBE

TL16C752CIPFBR01

TL16C752CIPFBR01 IC UART DUAL W/64B FIFO 48TQFP 1000 X REEL ROHS TAIWAN

LT1013DN8#PBF

Op Amp Dual Precision Amplifier±22V/44V Automotive 8-Pin PDIP N Tube

LT1271CQ

LT1271CQ LINEAR TECH REG MULT CONFIG INV ADJ DDPAK

LTC1430CS

LTC1430CSTUBESKU 17861750

LTC1661CMS8

LTC1325CSW#TRPBF

LTC1325CSW#TRPBF LINEAR TECHLTC1325CSWIC BATTERY MANAGMNT SYSTEM 18SOIC1000 X REEL ROHS Malaysia8542.39.0001 The LTC® 1325 provides the core of a flexible, cost-effective solution for an integrated battery management system. The monolithic CMOS chip controls the fast charging of nickel-cadmium, nickel-metal-hydride, lead-acid or lithium batteries under microprocessor control. The device features a programmable 111kHz PWM constant current source controller with built-in FET driver, 10-bit ADC, internal voltage regulator, discharge-before-charge controller, programmable battery voltage attenuator and an easy-to-use serial interface. The chip may operate in one of five modes: power shutdown, idle, discharge, charge or gas gauge. In power shutdown the supply current drops to 30uA and in the idle mode, an ADC reading may be made without any switching noise affecting the accuracy of the measurement. In the discharge mode, the battery is discharged by an external transistor while the battery is being monitored by the LTC1325 for fault conditions. The charge mode is terminated by the uP while monitoring any combination of battery voltage and temperature, ambient temperature and charge time. The LTC1325 also monitors the battery for fault conditions before and during charging. In the gas gauge mode the LTC1325 allows the total charge leaving the battery to be calculated.

LTM4600EV#PBF

LTM4600EV#PBF LTM4600EV DC-DC 4.5V to 20V Step Down Single-Out 0.6V to 5V 10A uModule 104-Pin LGA 30 X TUBE