Parts from NICHIA

NFSW757DT-V1

NFSL757DT

NF2L757DRT (ORANGE)

NF2L757DRT (YELLOW)

NFSL757DT-V1

NTSL757DT-V1

NS2W150T-H3

NS2W150T-H3WHITE LED 4000 X RWEELO ROHS

NSSL157AT-H3

NSSL157AT-H3 NICHIA157-00047WARM WHITE LEDLIGHT EMITTING DIODE5000 X REEL ROSHMADE IN JAPANTThis LED is designed to be reflow soldered on to a PCB. If dip soldered or hand soldered. Reflow soldering must not be performed more than twice. Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature. Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation, caused by heat and/or atmosphere. Since the silicone used in the encapsulant resin is soft, do not press on the encapsulant resin. Pressure can cause nicks, chip-outs, encapsulant delamination and deformation, and wire breaks, decreasing reliability. Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a hot plate should be used. It should be confirmed beforehand whether the charateristics of the LEDs will or will not be damaged by repairing. When soldering, do not apply stress to the LED while LED is hot.

NS2L757AT

NS2L757AT(157-00055)WARM WHITE LEDLIGHT EMITTING DIODE5000 X REEL ROHSMADE IN JAPAN

NSPW310DS

NSPW310DS(3800-068)SINGLE COLOR LED, WHITE, T-1, 3.1MMBULK ROHS

NS2L757-SW35FP9R

NSPW500CS

NSPW500CSSINGLE COLOR LED, WHITE, T-1 3/4, 5MM

NSPB300A-WS

LED BLUE CLEAR 3MM 470NM

NS2L757AT-V1

NS2L757AT-V1 (157-00061)WARM WHITE LEDLED Uni-Color White 2-PinLIGHT EMITTING DIODE5000 X REEL ROSHMADE IN JAPANSKU 23077513

NSSM016DT

NSPW300BS