SPECIALS

KEMET CORP.

C0603C102K5RAC7867

C0603C102K5RAC7867 KEMET(C0603C102K5RACTU)Cap Ceramic 0.001uF 50V X7R 10% Pad SMD 0603 125°C4K REELS ROHS

In stock: 656,712

$0.0050 / ea $0.0100

MURATA

GRM21BC71E106KE11L

GRM21BC71E106KE11LCap Ceramic 10uF 25V X7S 10% Pad SMD 0805 125°C

In stock: 5,645

$0.0400 / ea $0.0500

NICHIA

NSSL157AT-H3 NICHIA157-00047WARM WHITE LEDLIGHT EMITTING DIODE5000 X REEL ROSHMADE IN JAPANTThis LED is designed to be reflow soldered on to a PCB. If dip soldered or hand soldered. Reflow soldering must not be performed more than twice. Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature. Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation, caused by heat and/or atmosphere. Since the silicone used in the encapsulant resin is soft, do not press on the encapsulant resin. Pressure can cause nicks, chip-outs, encapsulant delamination and deformation, and wire breaks, decreasing reliability. Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a hot plate should be used. It should be confirmed beforehand whether the charateristics of the LEDs will or will not be damaged by repairing. When soldering, do not apply stress to the LED while LED is hot.

In stock: 40,394

$0.1000 / ea

SEOUL SEMICONDUCTOR

WH104-NZ

WH104-NZSIZE 1.6X0.8X0.45LED Small size suitable for compact appliances4000 X REEL ROHS HF

In stock: 2,380

$0.2000 / ea

NXP

74AHC74BQ,115

Dual D-type flip-flop with set and reset, positive-edge triggered; 14-pin DHVQFN (2.5×3 mm) exposed pad, supply voltage 2–5.5 V, clock frequency up to ~115 MHz; part 74AHC74BQ,115.

In stock: 2,520

$0.2500 / ea