TEXAS INSTRUMENTS
TLC3544IPW
ADC SGL SAR 200KSPS 14BIT SERL 20TSSOP
In stock: 65
On our shelves in San Jose. We do not dropship.
Stock on our shelves
Date code and country of origin on every lot.
| Quantity | Date code | Country of origin |
|---|---|---|
| 65 | — | United States |
| 65 | 1 lot on the shelf | |
Need a specific date code, or all of it from a single lot? Tell us on the quote and we will confirm before shipping.
Specifications
| Manufacturer | TEXAS INSTRUMENTS |
|---|---|
| Manufacturer part number | TLC3544IPW |
| Category | IC |
Compliance & export
| Country of origin | United States |
|---|
Classification is provided for reference and confirmed on the invoice. Certificate of conformance and date-code guarantee on request — ask with your order.
Description
TLC3544IPW TEXAS INSTRUMENT The TLC3544 and TLC3548 are a family of 14-bit resolution high-performance, low-power, CMOS analog-to-digital converters (ADC). All devices operate from a single 5-V analog power supply and 3-V to 5-V digital supply. The serial interface consists of four digital inputs [chip select (CS), frame sync (FS), serial input-output clock (SCLK), serial data input (SDI)], and a 3-state serial data output (SDO). CS (works as SS, slave select), SDI, SDO, and SCLK form an SPI interface. FS, SDI, SDO, and SCLK form a DSP interface. The frame sync signal (FS) indicates the start of a serial data frame being transferred. When multiple converters connect to one serial port of a DSP, CS works as the chip select to allow the host DSP to access the individual converter. CS can be tied to ground if only one converter is used. FS must be tied to DVDD if it is not used (such as in an SPI interface). When SDI is tied to DVDD, the device is set in hardware default mode after power-on, and no software configuration is required. In the simplest case, only three wires (SDO, SCLK, and CS or FS) are needed to interface with the host