Skip to main content
Open now · until 4 PM
1-800-321-5031
TEXAS INSTRUMENTS

TLC556CDR

Timers & Support Products Dual CMOS

In stock: 3,172

On our shelves in San Jose. We do not dropship.

Stock on our shelves

Date code and country of origin on every lot.

Lots in stock for TLC556CDR
Quantity Date code Country of origin
2,230 0400 United States
278 49C56TT
278 4014157
230 46CF98T
29 5AA5ECF
29 1515XIITT
68 52AB53T
30 14187T
3,172 8 lots on the shelf

Need a specific date code, or all of it from a single lot? Tell us on the quote and we will confirm before shipping.

Specifications

Manufacturer TEXAS INSTRUMENTS
Manufacturer part number TLC556CDR
Our part number 213885
Category IC
Date codes in stock 0400, 14187T, 1515XIITT, 4014157, 46CF98T, 49C56TT, 52AB53T, 5AA5ECF

Compliance & export

Country of origin United States

Classification is provided for reference and confirmed on the invoice. Certificate of conformance and date-code guarantee on request — ask with your order.

Description

TLC556CDR TEXAS INSTRUMENTS Description The TLC556 series are monolithic timing circuits fabricated using the TI LinCMOS¯£ª process, which provides full compatibility with CMOS, TTL, and MOS logic and operates at frequencies up to 2 MHz. Accurate time delays and oscillations are possible with smaller, less-expensive timing capacitors than the NE556 because of the high input impedance. Power consumption is low across the full range of power supply voltages. Like the NE556, the TLC556 has a trigger level approximately one-third of the supply voltage and a threshold level approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset input can override all other inputs and can be used to initiate a new timing cycle. If the reset input is low, the flip-flop is reset and the output is low. Whenever the output is low, a low-impedance path is provided between the discharge terminal and ground. While the CMOS output is capable of sinking over 100 mA and sourcing over 10 mA, the TLC556 exhibits greatly reduced supply-current spikes during output transitions. This minimizes the need for the large decoupling capacitors required by the NE556. These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015. However, care should be exercised in handling these devices, as exposure to ESD may result in degradation of the device parametric performance. All unused inputs should be tied to an appropriate logic level to prevent false triggering. The TLC556C is characterized for operation from 0°C to 70°C. The TLC556I is characterized for operation from 40°C to 85°C. The TLC556M is characterized for operation over the full military temperature range of 55°C t

Similar parts on our shelves

Same part number family — confirm the specs before you swap.

TEXAS INSTRUMENTS

TLC555CDR

CMOS TIMER 8-SOIC

In stock: 110
$0.4000 / ea
TEXAS INSTRUMENTS

TLC556CN

TLC556CN 2X7 POS DIP 15V Dual LinCMOS timer

Only 73 left
$0.3200 / ea
TI

TLC5510INSLE

8-BIT ADC, FLASH METHOD

In stock: 575
$1.1000 / ea
TEXAS INSTRUMENTS

TLC556ID

Standard Timer Dual 14-Pin SOIC Tube

In stock: 184
$0.7000 / ea